This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

socket

Hi,

We are making IC validation board, in this board we are using
IC socket www.ironwoodelectronics.com/.../sbt.cfm
on which we will place different sample of IC and test it.
But before placing the IC sample in the socket, we want to test the BGA pins( for Continuity and shorts)on the
socket on which the socket and IC samples will place.

We want to check the shorts so that IC samples should not damage.

Can you please tell me how I can test pins on socket for shorts?is there any Adapter board available in market?

Thanks
Ash

1 Reply

  • Genius 12865 points

    Not sure there is a method to check the socket, you might try this question with Ironwood.

    What part are you validating?

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.