Hello,
Is there a way to control what commands are logged in the PMBus log? I have been playing around with the tool, and I can't figure out a way to edit what is logged. I am talking about the text file logs that are generated by going to "Tools" > "PMBus Logging...", in case that is not clear. I ran an overnight test recently, and wanted to record the READ_POUT results for the entire test run, but the Smart Fusion software crashed four hours into the test, which I think might be due to the sheer size of the log file. I am hoping that I can add to the amount of time for which the software will log data of interest by minimizing which data is captured in the log.
Please let me know if there is a way to pick and choose which data is logged.
Thanks.
-Courtney
Hello Courtney,
There is no option in the Fusion GUI right now where you can select the commands that are logged but you can edit your Monitor Polling Interval so that you can lower the results being logged. This option is available in the Tools-> Debug console -> Monitor Polling Interval.
Thanks