TI E2E Community
Digital Power Forum
UCD7242 VIN to VOUT Step-Down Ratios
I want to check whether my design Vin=16 V,vout =1V is right(UCD9222+UCD7242)?
But I can't find the Minimum on-time tON(MIN) parameter used to calculate the step down ratio.
The DRIVER_MIN_PULSE for the UCD7242 is 20ns and can be found on the Advanced_Config tab on the Configure page of the Fusion Digital Power Designer.
It is populated automativally by the GUI when the driver selection is made and written on the Design page of the GUI.
If the Advanced_Config tab isn't visible then go to the File dropdown and click Preferences, then select the Show advanced editors and features which are normally hidden checkbox and click OK.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.