Are there any design guides from Texas Instrument for calculating the bootstrap capacitor value of the TPS28225 Gate Driver? There are design guides from other vendors/company with regarded to the bootstrap capacitor value, however they are using difference parameters.
My design specification:
Supply voltage: Vcc 5V, throughout the design
Gate driver: TPS28225
Switching MOSFET: IRFH8337PBF
P.S: At the moment I just used a random 150nF for my design, but this is risky.
please refer to the attachment for details
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.