I am designing a circuit where i need +3V and -8V output from a power management IC with 5V inputs, with output current at 2A. Can any one suggest me such a design that my requirement will be fulfilled. thanks,
The 5Vin to 3.3Vout at 2A is easy. Just use SwitcherPro (search at www.ti.com to find)
5Vin to -8Vout at 2A is more difficult. you'll need an inverting flyback like the one in this application note http://focus.ti.com/lit/an/slva312/slva312.pdf or this application note http://focus.ti.com/lit/an/slva257a/slva257a.pdf I suggest the latter because it has a lot less parts to design.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.