Part Number: TL432A
Can we use this Volt.Ref. in wave(Flow) soldering during our production soldering process?
I can see only Reflow recommendation in TI website.
We using SOT-23-3 Case.
Our voltage references are not characterized for wave soldering. However, here are some application notes on wave soldering SMD devices that suggest that the SOT-23 package can handle it:
We have also conducted an internal study in accordance with the published JESD22-A111A standardized test that showed that the TL432 was viable for wave solder.
It is however important to keep in mind that the stress caused by soldering can shift our references, so we cannot guarantee accuracy since this use case has not been characterized.
Regards, Diego Lewis
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.