• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 61 subscribers
  • Views 1022 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS3422: May I permanently connect PB1 of TPS3422 to GND?

user3901588
Prodigy 10 points
Part Number: TPS3422

Hello,

   I would like to confirm my idea with TPS3422:

   1. May I permanently connect PB1 to GND? like following.

        

    

2. I expect :  /RST of TPS3422  work like timing diagram in following:

Thanks,

Best Regards

 my understanding of a datasheet

  • 0
    TI__Genius 12630 points
    Hello,

    Thank you for using our device. Yes, you can permanently connect PB1 to GND. The device will reset after VCC comes up and the 7.5s delay occurs but then the device will never reset again until the power is turned off and the device is powered up again.

    I hope this answers your question! Let me know if you have any more questions.

    -Michael