Part Number: LMG5200
my customer has rise the following questions below please advise back:
1.What input current of the LMG5200MOFT should receive?
c.can I directly connect the Pins of the LMG5200MOFT to the TMS320F2837xD?
d.What is the reason that you connect the SN74AVC8T245RHLR between DRIVER (LMG5200MOFT) and MCU (TMS320F2837xD)?
thanks in advance and regards,
To answer you cursomer's questions:
a&b) the LMG5200 HI and LI pins are logic high impedance pins, consider these ~2pF and min 100 kohm to ground, so the current really depends on the frequency but it will be very low.
c) if the I/O voltage is kept above 3.14V as per spec your lowest output voltage out of the I/O pin is above 2.5V, this will be sufficient to trigger the logic threshold for the LMG5200 (2.22V max). Given this, it is possible to drive the LMG5200 directly.
d) as I don't have much information about this project I assume SN74AVC8T245RHLR is there as a buffer to break a long run between the micro and the power stage, also it might be there to increase the dynamic range and reduce pulse width distortion. This depends on what the Vdd power rails look like under all conditions.
I hope this answers your question, but please feel free to reach out if you have more questions!
In reply to Alberto Doronzo:
In reply to Shai Berman:
the TIDA-00913 is available as an orderable EVM under the part number:
Please let me know if you have any issues ordering this.
Thank you and best regards,
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.