TI E2E Community
AC/DC and Isolated DC/DC Power
AC/DC and Isolated DC/DC Power Forum
UCC25600 for AC output
Can the rectifier diodes be removed to provide an AC high voltage output to drive a SONAR element?It seems possible to produce an AC output, the exact frequency would be dependent on the operating point on the resonant curve.Are there any examples of AC outputs with this resonant controller?
Ed WalkerTexas Instruments ACAT/DCAT Support
The AC output of the LLC will be a square wave voltage, while the current will be sinusoidal (or close to sinusoidal). We do not have any examples of such a configuration.
Make a small Class D amplifier with the reference freq as you want.
Tried to filter the output voltage of the LLC to a sinusoidal? A LC filter would be best.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.