I'm looking for some reference designs for a 18-60VDC in, 5VDC out, 25-30W isolated DC/DC converter. I could find some designs that work from 36-72VDC input. E.g., LM5030's EVM AN-1305 LM5030 Evaluation Board. I'm not sure whether the same can be extended to my requirement. Any inputs in this regard would be of help.
Thanks
Krishnan,
The LM5030 Evaluation board was design to operate over the standard Telecom input voltage range which is 36-72Vdc. Yes you could modify the design to work from 18-60Vdc, this would require you to change the transformer turns ratio, possibly the current sense resistor, the output feedback divider network, and feedback compensation network.
Terry