This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC39002 low voltage (under 1V) load share

Other Parts Discussed in Thread: UCC39002

Hi...

My customer wants to apply UCC39002 on load voltage of under 1V, (especially, 0.5V)

But it is not normally operated on under 1V because V(ADJ) must be equal to or greater than V(EAO)+1V.

So my customer wants to know how to apply UCC39002 on load voltage of under 1V.

Please refer to the below schematic.

4034.UCC39002_Schematic.pdf

I hope that you provide a good solution and advice.

Thanks.