Hi All,
I want to know the efficiency of the LM5140-Q1.
Data sheet is only up to 5A.
Please teach me the efficiency of 10A.
1)Vin=16V Vout=8V
2)Vin=16V Vout=5V
Best Regards
Koji Hayashi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi All,
I want to know the efficiency of the LM5140-Q1.
Data sheet is only up to 5A.
Please teach me the efficiency of 10A.
1)Vin=16V Vout=8V
2)Vin=16V Vout=5V
Best Regards
Koji Hayashi
Hello Hayashi-san,
I will forward your question to the appropriate engineering staff who can answer your question, which properly belongs in the Non-Isolated DC/DC Power Forum.
Regards,
Ulrich
Koji,
VIN 16V, VOUT1 5V, VOUT2 8V and a 10A load on each output, operating at 2.2MHz, the efficiency will be approximatly 86%. I do not have measured data for this application, I used the Quickstart calculator which can be found on the web.
Terry
Koji,
I used the quickstart calculator that can be found on the web, http://www.ti.com/product/LM5141-Q1/technicaldocuments.