This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TPS65150: VGH voltage calculator

Part Number: TPS65150

HI Sir 

May I know TPS65150 can support VGH=22V when AVDD is 8.2V ? 

I saw below figure need to use AVDD 8.8V at least 

  • Hello Kai Hsiao,

    The total headroom for the double stage charge pump is mostly dependent of the diodes you are using. The output current is below 1 mA, so if you will use high-current diodes (preferably shottky) which makes sure that the voltage drop will be ~0.2-0.3 V I think you will have a good chance to get 22 V.
    But this needs to be verified on the application. Please use the equations that the application note provides.

    Best Regards.
    Ilona
  • In reply to Ilona:

    Hello Kai Hsiao,

    Did this answer your questions. If so please verify by clicking 'This resolves my issue'.

    Thank you.
    Best Regards.
    Ilona

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.