This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS61185 Isd and EN/PWM pin

Other Parts Discussed in Thread: TPS61185

Hi,

My customer has questions about TPS61185.
Could you tell me about questoin?

[Question]
- How much is the shutdown current(Isd) at Ta=0 to 50 degree C?
- If EN pin and PWM pin is OPEN, will each pin be Low?
  How much is the pull down rsistor on EN and PWM at Ven=3.3V(Vpwm=3.3V)?

Best Regards,
tateo

  • Hi Tateo,

    * Shutdown current

    We have no specific data about 0 ~ 50degC but please refer to the information below. (TA = –40 to 85°C)

    * EN & PWM are open, both pins are pulled down internally to make sure the logic state is low

    * Pull down resistor value

    This should have similar R in case of 3.3V VIN.

    Best regards,

    Milo