This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TPS7B4250-Q1
Do you know the operating principle of tracking LDO,such as TPS7B4250-Q1.Could you help to describe the details of it?
How do ti works?
Thanks for you.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Jason Song:
In reply to Hello Kitty:
For the operating of TPS7B4250-Q1, there are three things that are different than regular LDOs.
1. An external reference needs to be provided in a range of 1.5V to 18V.
2. The output's tracking feature allows it to follow the external voltage rail or reference.
3. The device will start operating once Vin is higher than Vuvlo(Minimum Vin = 4V). The tracking will start once the external reference voltage exceeds 1.5V. A negative falling edge lower than 0.8V will turn the device into inactive mode which will provide reduced quiescent current.
Please let me know if this answers your questions.
Regards, Jason Song
1. I talked to a designer and according to him, usually the tracking LDO is dynamically changing its internal voltage reference set by the external reference, that's when Vout is tracking Vref. Once it reaches the desired Vout, the reference might be switched to its internal reference, such as bandgap voltage; the loop gain may also get changed during the switching. There would be different approaches to implement the concept in the circuit, if you are interested, you may need to find some textbook or application notes on this topic to explore more.
2. I am not sure if I understand your second question on "Why does the tracking LDO could reduce the dropout of long cable and regular couldnot?" Long cable is usually discussed in the applications that in the car system, the main circuit board needs to power on some sensors through long cable and transmitting power. In this kind of application, tracking LDO serves as a protection to the main board from the potential short-to-ground or short-to-battery situation resulted in the long cables. Let me know if this answered your questions.
Regads Jason Song
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.