This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
This LM7915CT 15 volt regulator IC, which I have not yet ordered, comes in a TO-220 case. I need to know if the back of the case is metallic or epoxy. The reason it's important is that this part will be mounted to the chassis ground and if it's metallic and if it's consistent with every other TO-220 case I've come to know, then the center pin (pin 2) will be electrically connected to the metal case. That is not acceptable because pin 2 is the voltage input. The datasheet does not indicate whether or not it's insulated. Thank you for your help.
Best, Eric Preiss | Applications and Validation Engineer | Linear and Low Dropout Regulators | Texas Instruments
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.