Does any one know the difference in these parts (an if you tell mewhat the G3 suffix means)? Device Status Temp (*C) Price Price 100 unit Package Pack Qty UA78L05ACPK ACTIVE 0 to 125 0.34 | 1ku 0.39 SOT-89 (PK) 1000 UA78L05ACPKG3 ACTIVE 0 to 125 0.34 | 1ku SOT-89 (PK) 1000 Thanks, Rinzai Bell
Does any one know the difference in these parts (an if you tell mewhat the G3 suffix means)?
Device
Status
Temp (*C)
Price
Price 100 unit
Package
Pack Qty
UA78L05ACPK
ACTIVE
0 to 125
0.34 | 1ku
0.39
SOT-89 (PK)
1000
UA78L05ACPKG3
Thanks,
Rinzai Bell
Rinzai,
Please review the follow link posted in a previous forum post.
http://e2e.ti.com/support/power_management/linear_regulators/f/321/p/134379/483708.aspx#483708
Regards,
Darwin
Hello Rinzai,
The suffix refers to the lead finish.
The Quality and Environmental Data section of the product web page lead to this link.http://focus.ti.com/quality/docs/searchbyopn.tsp?templateId=5909&navigationId=11220&orderablePartNo=UA78L05ACPK&pnType=A
Both have the same CU SN lead finish.
Regards,Ron Michallick
Regards,Ronald MichallickLinear Applications
TI assumes no liability for applications assistance or customer product design. Customer is fully responsible for all design decisions and engineering with regard to its products, including decisions relating to application of TI products. By providing technical information, TI does not intend to offer or provide engineering services or advice concerning Customer's design. If Customer desires engineering services, the Customer should rely on its retained employees and consultants and/or procure engineering services from a licensed professional engineer (LPE).