• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 400 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS768xx with enable active high

Paul Antunes
Intellectual 2520 points
Other Parts Discussed in Thread: TPS768, TPS73801

Dear Linear regulator,

do we have same device as TPS768xx but with Enable active high ? current version shuts down the regulator when TTL high signal is applied to EN pin.

My customer would the opposite TTL logic.

thanks
Paul

  • 0
    TI__Guru 55940 points
    Hi Paul,

    Is there any particular requirements that you have for the LDO? I see that TPS768 is a 1A LDO, it has a PG, and you would like an EN pin rather than a /EN pin. Would a device like TPS73801 work for your application?

    Very Respectfully,
    Ryan