TPS775-Q1: TPS77501QPWPRQ1 - the tolerance of RESET time-out delay 200ms between TJ=25C and TJ=-40C to 125C(full temparature range)

Hirotaka Matsumoto

Part Number: TPS775-Q1

Hi all

Would you mind if we ask TPS77501QPWPRQ1?

There is the description about RESET time-out delay=200ms@typ.
How much is the the tolerance of RESET time-out delay 200ms between Tj=25C and -Tj=-40C to 125C?
Of course, we guess that you don't have guaranteed data.
So, if you have reference data, could you give us it?

Kind regards,

Hirotaka Matsumoto

over 7 years ago

0 Ryan Eslinger over 7 years ago

TI__Guru 55940 points

Hi Hirotaka,

At the time of release we did not drift this particular parameter. Please allow a delay for me to take some measurements for you.

Very Respectfully,
Ryan

0 Hirotaka Matsumoto over 7 years ago in reply to Ryan Eslinger

Guru 27525 points

Ryan san

Thank you very much for your support always!
If it is possible, is it possible to get your reply(test result) by this Friday?
If you need a few days or a a few weeks, could you let us know?

Kind regards,

Hirotaka Matsumoto

0 Ryan Eslinger over 7 years ago in reply to Hirotaka Matsumoto

TI__Guru 55940 points

Hirotaka-san,

Yes we should be able to provide a curve of how the reset time-out drifts by Friday. Thank you for your patience.

Very Respectfully,

Ryan

0 Hirotaka Matsumoto over 7 years ago in reply to Ryan Eslinger

Guru 27525 points

Ryan san

Thank you for your cooperation!
OK, we are waiting for your reply.

Kind regards,

Hirotaka Matsumoto

0 Ryan Eslinger over 7 years ago in reply to Hirotaka Matsumoto

TI__Guru 55940 points

Hirotaka-san,

Thank you for your patience. I was able to drift one unit today. As you can see, on the unit I drifted the timeout delay is longer than the typical delay; however, the curve below will give you an indication of how the time delay drifts over temperature.

If a more accurate time delay is required, we can help recommend a supervisor.

Very Respectfully,

Ryan

Power management

Power management forum

TPS775-Q1: TPS77501QPWPRQ1 - the tolerance of RESET time-out delay 200ms between TJ=25C and TJ=-40C to 125C(full temparature range)