[ TPS7B7701-Q1 ] SENSE_EN pin and Output Filter
Hi,
Can you help my customer to finalize their TPS7B7701-Q1 deisgn?
<SENSE_EN pin>:
This pin can be connected to GND without any filter, correct?
From EVM schematics, it should be no problem.
<Output Filter>:
My customer would use following output filters. Can you take a look and let me know if you have any of concerns?
EMI filter BLM21PG331SN from Murata
www.murata.com/.../productdetail
10uF and 47pF to GND
10nH
Thank you for your support in advance.
Regards,
Ken