TI E2E Community
Non-Isolated DC/DC Forum
TPS54260 24V to -15V design
I designed an inverted power supply with input voltage of 24V and output voltage of -15V using TPS54260. I used the calculator as well as reference designs from the TI website. But unfortunately the power supply is producing around -7 volts instead of -15V. I am attaching my design as well.
I tried to change the Cin as well but of no use.
Any help in this regard is highly appreciated.
Thanks and regards;
I don't see anything obvious. Can you post some waveforms? Vin, Vout, PH? What is your load? Can you test it with nothing attached? Or possibly 30 ohm?
SWIFT DC/DC Applications
how did you solve your problem?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.