TPS56C20EVM Loop response graph

K. Sasaki14

Do you have Loop response graph of TPS56C20EVM?

The EVM has a resistor in voltage divider network for Loop response measurement. Thus I would like to get the Loop response graph if you have.

Best Regards,

Kohei Sasaki

over 9 years ago

0 JohnTucker over 9 years ago

TI__Guru**** 191445 points

i did not see this post previously. Every now and then one slips past. I did not design and test that EVM. I'll see if the apps engineer has any data for it, but we typically do not measure the loop for DCAP2 devices.

0 JohnTucker over 9 years ago in reply to JohnTucker

TI__Guru**** 191445 points

I do have one example, Vin = 12 V, Vout = 1.1 V, Iout = 6 A. There is a FF cap in the circuit also.

Power management

Power management forum

TPS56C20EVM Loop response graph