This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

lm5007 with 24v output

Other Parts Discussed in Thread: LM5007

Dear TI

I designed the power board to get 24V output with LM5007MM.

I referred to application circuit of the datasheet for 10V output. I changed the register R6, R8 for 24v output.

But the output voltage is 2volt. I know now how to solve this problem. I attached the schematic of my circuit.

Please let me know if you have any advice.

Best regards.

Lee

  • Lee,

    My first recommendation is that you go to the ti.com website, enter in the LM5007.  Then use the WEBENCH tool and enter in your system requirements.  You are still using the same inductor value as in the 10V output design, my guess is you will need to make other component changes.

    Terry