TPS64200: σ of FETs on resistance

Kuramochi Tadahiko

Guru 28715 points

Part Number: TPS64200

Hi,

I received the question from my customer.

How much is the σof P/N FETs on resistance for our reference?

They hope the reply quickly.

Best Regards,

Kuramochi

over 7 years ago

0 Chris Glaser over 7 years ago

TI__Guru*** 142750 points

Since the maximum value is not specified, I don't think it makes sense to discuss a distribution.

I don't think we can share anything besides what is already in the D/S, but if you can explain what they are trying to achieve with their circuit, maybe I can discus this.

0 Kuramochi Tadahiko over 7 years ago in reply to Chris Glaser

Guru 28715 points

Glaser-san,

Thank you for your response.

They don't require guarantee and would like to know it for their reference.

I have gotten the information of dispersion on another device as follows.

Best Regards,

Kuramochi

0 Chris Glaser over 7 years ago in reply to Kuramochi Tadahiko

TI__Guru*** 142750 points

These are very different devices, specs, and questions. But usually for a parameter without a min/max limit you can expect ~30% variation.

0 Terry Allinder over 7 years ago

TI__Expert 3535 points

Kuramochi,

I believe what you’re asking for is the variation on the internal (Driver) P and N channel FETs rdson. If you’re trying to determine the switching losses, I recommend just using the typical values in the data sheet. The variation of the external FETs Qg, resistance, and capacitance make the calculation very inaccurate, a first order estimate maybe best.

Terry

Power management

Power management forum

TPS64200: σ of FETs on resistance