LM53602-Q1: Min/Max Input Voltage Threshold for Mode Change in AUTO Mode

Shinichi Yokota

Part Number: LM53602-Q1

Hello,

Could you provide me with the possible Min and Max input voltage threshold for mode change in AUTO Mode? Figure 13 on page 16 of LM53602-Q1's data sheet shows only a typical curve, but what I ask for is the Min and Max curves of that parameter.

Best regards,
Shinichi Yokota

over 6 years ago

0 Frank De Stasi over 6 years ago

TI__Guru 57555 points

We do not have min and max data for this parameter. It can not be tested on the ATE.

0 Shinichi Yokota over 6 years ago in reply to Frank De Stasi

TI__Genius 9715 points

How about a rough estimate number? That will be OK if it's available. I need a reference to estimate the variation - whether it's around 10%, 20% and so forth.

Best regards,
Shinichi Yokota

0 Frank De Stasi over 6 years ago in reply to Shinichi Yokota

TI__Guru 57555 points

It would be very dificult to give you a number. It could be +/-50%. We can not give you a good number.

Power management

Power management forum

LM53602-Q1: Min/Max Input Voltage Threshold for Mode Change in AUTO Mode