Welcome to the Non-Isolated DC/DC Section of the TI E2E Support Community. Ask questions, share knowledge, explore ideas, and help solve problems with fellow engineers. To post a question, click on the forum tab then "New Post".
Q: TPS62290 - EN > Vin? by 574
A question has come up regarding the enabling of the TPS62290. I see a spec in the datasheet that says that the enable needs to be below VIN + 0.3V. That makes sense to me but I have two questions:
1. Can you describe what happens if the spec is violated?
2. Can you recommend a series resistor on the enable to prevent this?
A: Re: TPS62290 - Vin Specs by 1090425
If this spec is violated, the device could be damaged and draw excessive current.
The best way to not violate this spec is to use a voltage divider on the signal driving the EN pin. Another option is a resistor followed by a zener diode to clamp the voltage. The zener must clamp the voltage below the abs max rating to guarantee proper operation.
If the absolute maximum ratings are exceeded, device operation is not guaranteed. You need to keep the voltage on EN between 1V and Vin to register a logic high (page 3 of datasheet). Simply limiting the current is not a valid solution since the voltage still exceeds the absolute maximum rating.
This also applies to the very similar TPS62240, TPS62260, TPS62560, and TPS62590.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.