Welcome to the Non-Isolated DC/DC Section of the TI E2E Support Community. Ask questions, share knowledge, explore ideas, and help solve problems with fellow engineers. To post a question, click on the forum tab then "New Post".
Q: TPS60150 Load Regulation by 1205403
TPS60150 and has one question regarding the load regulation.
On page 2 in the datasheet is mentioned an output voltage variation of Vout=4.8 to 5.2V. Does this also includes the maximum load regulation ?
A: Re: TPS60150 Load Regulation by 8433
For Iskip < Iout < 50mA and 2.7V < Vin < 5.5V, Vout remains between 4.8V and 5.2V. For Iskip < Iout < 120mA and 3.1V < Vin < 5.5V, Vout remains between 4.8V and 5.2V. When in skip mode (a loads below Iskip), the output could reach 5.3V. The Iskip threshold has not been characterized but is typically below 1mA. The IC will provide up to 140mA but the output may droop below 4.8V.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.