Welcome to the Non-Isolated DC/DC Section of the TI E2E Support Community. Ask questions, share knowledge, explore ideas, and help solve problems with fellow engineers. To post a question, click on the forum tab then "New Post".
Q: TPS62300 a TPS62290 using DAC to vontrol Vout by 439959
I would like to have a Technical support regarding the use of the : TPS62290 adjustable SON 2 x 2 DRV TPS62290DRV BYN
Currently Im using the TPS62300 device control by the ADC with Formula: Vo=1.5*Vdac. See attached document for schematics.
2308.TPS62290 ADC control.doc
Thank you
Moshe
Q: Re: TPS62300 a TPS62290 using DAC to vontrol Vout by 10449
You will be able to control the TPS62290 with an ADC. This application note shows how to dynamically adjust the TPS63000 with an ADC connected to the FB pin. The TPS62290 can be controlled the same way. http://focus.ti.com/lit/an/slva251/slva251.pdf
Hello,
Can you please advice below email? (Attach schematics)
Best regards
Currently Im using the TPs62300 device control by the ADC with Formula: Vo=1.5*Vdac
update with picture