TPS65218 team,
TPS65218 I2C was malfunction. Procedure is below.
1. Power up
2. Go to ACTIVE satate.
3. Write 0x10=0x6C
4. Write 0x11=0x34
After that, SDA and SLA are low. Then I2C is malfunction.
Could you try it?
Thanks,
Mitsuharu Iwasaki
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
TPS65218 team,
TPS65218 I2C was malfunction. Procedure is below.
1. Power up
2. Go to ACTIVE satate.
3. Write 0x10=0x6C
4. Write 0x11=0x34
After that, SDA and SLA are low. Then I2C is malfunction.
Could you try it?
Thanks,
Mitsuharu Iwasaki