PMIC for MCIMX6U5EVM10AC

Brian Wang0928

Genius 11610 points

Other Parts Discussed in Thread: TPS65086, TPS65911, TPS65910

Hello,

Could you help to advice for suited PMIC part number for freescale processor of the MCIMX6U5EVM10AC?

Thanks, Regards,

Brian

over 7 years ago

0 Andrew Goodson19 over 7 years ago

TI__Prodigy 185 points

Hi Brian,

Thank you for reaching out to us. Please consider the TPS659114 device.

Product folder is located here:

We have an application note for the I.MX6 Dual and Quad implementation of this device located here: .

Please let us know if you have any questions!

0 Brian Wang0928 over 7 years ago in reply to Andrew Goodson19

TI__Genius 11610 points

Thanks for your suggestion.

There is another inquiry of PMIC for HMI application. Delta HMI team is looking for the PMIC for the MCU chip: RockChip RK3288

Current soluiton for RK3288 is RK818/808. I am not sure if any TI PMIC can replace it? Very thanks.

Regards,

Brian

0 Andrew Goodson19 over 7 years ago in reply to Brian Wang0928

TI__Prodigy 185 points

Hi Brian,

Please consider TPS65086. I need to ask some additional questions so I will follow up with you offline.

0 Brian Wang0928 over 7 years ago in reply to Andrew Goodson19

TI__Genius 11610 points

in The TPS65911, there is one of rails need to configure BUCK with external FET. Is there any other with integreted? Just confirme it again. Thanks.

0 Andrew Goodson19 over 7 years ago in reply to Brian Wang0928

TI__Prodigy 185 points

Hi Brian,

We do not have any integrated buck solutions that are currently configured for the processor. We do have a device coming out which was configured from the TPS65910, but the device doesn't meet the max currents on the VDD_ARM_IN rail. If the customer only plans to run typ range on that rail, you may consider TPS65910 as an option.

Power management

Power management forum

PMIC for MCIMX6U5EVM10AC