This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65917-Q1: Recommend safty MCU

Part Number: TPS65917-Q1

Hi,

TPS65917-Q1 datasheet shows Safty MCU at "6.2 Typcal Application" in page 69.
What Safty MCU TI recommend as case of using TPS65917-Q1?

Best regards,
Shimizu

  • Hi Shimizu-san, the appropriate engineer has been assigned and should respond. Thanks, Scott
  • Hello Shimizu-san,

    There is no specific microcontroller which is needed for the TPS65917 application. The microcontroller just needs to be able to receive the signals including INT, POWERGOOD, voltage monitors, etc., and be able to control the PMIC inputs such as RESET_IN. Any microcontroller with enough GPIOs for your system will be able to monitor these signals and respond to a fault event by resetting or disabling the PMIC.

    Regards,
    Karl