Part Number: TPS65217
Customer made circuit as below, and under test.
During RESET TPS65217D, all power rail go to 0V, but only LDO4 doesn't go to 0V.
It remains as around 2.8V.
It happens even pull down RESET pin more than 1 seconds.
Could you check and let me know why LDO4 doesn't go to 0V while RESET?
In reply to Brian Berner:
In reply to Ajeya Anand:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.