TI E2E Community
TPS6505x unused ldo
Welcome to the PMU Section of the TI E2E Support Community. Ask questions, share knowledge, explore ideas, and help solve problems with fellow engineers. To post a question, click on the forum tab then "New Post".
Q: TPS65053 unused ldo by 8157
Customer is using the TPS65053, but doesnt need LDO2 and 3. I sent them the following reply. Please verify that it is correct. I based it off of a previous post, and assumed that the TPS65053 and TPS65023 would have the same requirements.
You can get rid of the extra components. Here is what you should do.
• Tie EN_LDO2 and EN_LDO3 to GND.
• Connect FB_LDO2 to VLDO2 and don’t connect it to anything else. You can then remove the LDO2 resistor divider and output caps.
• Leave VLDO3 floating. Remove its output cap.
• Leave VINLDO2/3 floating. You can then remove bypass caps associated with that input.
A: Re: TPS65053 unused ldo by 1129650
You are correct with the configurations for unused regulators VLDO2 and VLDO3 for the TPS6505x family.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.