TI E2E Community
Power Interface Forum
Question on TPS2384 ADC converter
I have a question about the accuracy of the TPS2384's ADC converter (the relationship with the temp. in the entire temp. range). Thanks for your help.
Specifically, are you interested to know the "Port temperature A/D conversion" tolerance over the device temperature range? If so, I can check if there is unit test data available for this parameter.
I want to know the accuracy of the "Port current A/D conversion scale factor" ,and I also want to know how it changes when the temperature is changing? Thanks.
Data from 30 devices tested on port 4 from 20mA-300mAcan be summarized as follows:
-40C: Min=34.075, Avg=35.442, Max=36.389, Stdev=0.5353
25C: Min=34.242, Avg=35.437, Max=36.221, Stdev=0.4413
125C: Min=34.385, Avg=35.327, Max=35.910, Stdev=0.3393
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.