Hello TI-er
My customer is designing TPS2115a.
They have a question about inputs (IN1 and IN2).
They want to use in case of IN1>3V and IN2=0V.
Are there any problems?
Regards. D Higa
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello TI-er
My customer is designing TPS2115a.
They have a question about inputs (IN1 and IN2).
They want to use in case of IN1>3V and IN2=0V.
Are there any problems?
Regards. D Higa
In this case, OUT=IN1 if D1 and D0 are set according to the truth table (Table 1) on page 6 of the DS.