TI E2E Community
NexFET™ Power MOSFETs
NexFET™ Power MOSFETs Forum
In the layout recommendation section for this part http://www.ti.com/lit/ds/symlink/csd86330q3d.pdf, there is a placement priority as shown:
In terms of priority of placement next to the Power Block, C5, C7, C19, and C8 should follow in order. My question is for the C19 and C8. Do it matter if C19 is placed closer to my buck controller instead? And lastly C8, it is a cap place at the EN/SS of my buck controller TPS40322. Why should it be brought up for the CSD86330Q3D layout?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.