This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TINA/Spice/CSD17318Q2: CSD17318Q2 - TINA Model

Part Number: CSD17318Q2

Tool/software: TINA-TI or Spice Models

Hello,

I found for the CSD17318Q2 only a transient PSpice Model but I cannot open this file in TINA-TI. Can you help me?

Thanks!

  • Fatih,
    I do not think you can open PSpice models in TINA-TI but I am looking into this a little more. Our modelling expert is out until Wednesday so I will have an answer for you by then at the latest.

    Best Regards!

    Brett Barr

    Product Marketing Engineer

  • In reply to Brett Barr1:

    ok, Iam looking forward, thanks. If you can provide for me a .lib-file or a macro or a Model for the CSD17318Q2 i will be very happy.

  • In reply to Fatih Erdogan:

    Fatih,
    I am going to put in a request for you. What model of TINA are you using?

    Best Regards!

    Brett Barr

    Product Marketing Engineer

  • In reply to Brett Barr1:

    I use Tina-Ti v9.3.150.328 SF-TI.

    Thank you a lot!

    Best Regards

    Fatih 

  • In reply to Fatih Erdogan:

    Fatih,

    I submitted a request for a model. The official line is that it may take up to two weeks, but in my experience, requests for FET models usually do not take that long. I will leave this thread open until I have something for you. 

    Best Regards!

    Brett Barr

    Product Marketing Engineer

  • In reply to Brett Barr1:

    Fatih,
    For some reason I have not heard back from the modelling team yet on this but I am going to investigate and see what happened here.

    Hopefully I will have some info for you in a day or so.

    Best Regards!

    Brett Barr

    Product Marketing Engineer

  • In reply to Brett Barr1:

    Fatih,
    Looks like the snuck this online without alerting me. Again, I apologize for the delay on this. Hopefully this satisfies your needs.

    www.ti.com/.../toolssoftware

    Thanks again for your patience.

    Best Regards!

    Brett Barr

    Product Marketing Engineer

  • In reply to Brett Barr1:

    thank you.

    Best Regards.

    Fatih

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.