Hi Support,
CSD16301Q2 die after turn OFF, it is found dead with not able to turn ON, the mosfet will exhibit low impedance on all between its legs (GDS).
Request for review.
Thanks.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Support,
CSD16301Q2 die after turn OFF, it is found dead with not able to turn ON, the mosfet will exhibit low impedance on all between its legs (GDS).
Request for review.
Thanks.
It is unclear from the schematic exactly how the FET is being used in this application. Is it just a load switch?
Waveforms of the FET in use would be helpful. Also, what are the electrical conditions the FET is subject to? What voltage is the FET expected to block, current through the FET, switching frequency, gate voltage?