TI E2E Community
Power Modules - Forum
In the website, plating details(Material Declaration) for part "PT78ST112S" is not given. Could you please share the same? If it is Tin plated, kindly the share the following details also
1. Type of Tin(Matte/Bright)
2. Underplating material used
3. Tin whisker test report conducted for this part
PT78ST115S , PT78STXXXX series has:
1. Pin plating is matte tin(Sn) 100% 300-500 microns
2. Under plating is nickel(Ni) over a copper base metal.
3. The pins do not have any conducted tin whisker tests
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.