This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MicroSip package docs ambiguity

Other Parts Discussed in Thread: TPS81256, TPS82671

Hi,

I'm routing a schematics with TPS81256 and I found an ambiguity in docs. 

Specifically, the datasheet  www.ti.com/.../tps81256.pdf (page 3) shows the pin numbering a,b,c along the long side of the device, while this document (referring to the same MicroSip package)  shows a,b,c along the short side of the chip. What is the correct way?

Cheers

Kirill