Part Number: PTN78000W
To TI E2E Community;
I have a customer who needs a DC/DC converter with Vin = 20-70V and Vout = 3-9V @ 350mA within IP65 enclosure;
they did not mention whether it needed to be isolated or non-isolated. The closest I found were the non-enclosed non-isolated
PTN78000 modules at the below link with smaller input ranges and wider output ranges,
Can you help us with this? Would these modules listed above be the closest to the customer's requested above specifications?
If you have an answer to this query, then can you please email it to me at firstname.lastname@example.org with the thread title?
Dan Rapp Technical Support Mouser Electronics (800) 346-6873
(817) 804-3800 www.mouser.com
I sent you an email offline.
We do not have a module that meets all of your specs, but we have a couple other to consider.
Look at LMZ35003 & LMZ36002.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.