LMZ31710EVM-001: hole position of four corner

higa daisuke

Part Number: LMZ31710EVM-001

Hi support team

Could you provide the information which the hole position data(X:?mm/Y:?mm) of four corner of the LMZ31710EVM-001?

Best regards.

Higa

0 JohnTucker over 6 years ago

Those are thru holes if you want to use stand offs. Why do you need the x-y data?

0 higa daisuke over 6 years ago in reply to JohnTucker

Hello Tucker-san

I'm sorry I dindn't make it clear enough.

I am a distributor in Japan.

The reason for the question,because I asked from my customer.

Best regards.

Higa

0 JohnTucker over 6 years ago in reply to higa daisuke

Do you need any further support? Let me know.

0 higa daisuke over 6 years ago in reply to JohnTucker

My customer needs the x-y data of hole position(center position) of four corner.
Can you provide it?

Best regards.

Higa

0 JohnTucker over 6 years ago in reply to higa daisuke

Let me see if it is available.

0 J Arrigo over 6 years ago

The holes are located 0.150” (3.81mm) from the edges of the board.

0 higa daisuke over 6 years ago in reply to J Arrigo

Hello Arrigo-san

Thank you very much for your support.

Best regards.

Power management forum