This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: PTH12040W
My customer need the information of thermal management for the component part number PTH12040WAD.For Conduction based cooling.
PTH12040W thermal data for all airflows including thermal natural convection( Natural Conv) , no air flow, is located in the product specification pages 6 for 12Vin and page 7 for 8Vin.
The thermal (SOA derating data versus air flow at Vout .
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Tom Guerin:
What will be the max allowable case temperature of each component .
How the power has been splitting for each component.
For the specified part,we have component heat sink temperature is 85°C. Will it be sufficient for cooling?
Kindly suggest us.
In reply to Arivazhakan M:
PTH12040W thermal data for all airflows including thermal natural convection (Natural Conv), no air flow, is located in the product specification pages 6 for 12Vin and page 7 for 8Vin.
The thermal (SOA) safe operating area is derating data versus air flow at Vout at output current
The maximum ambient temperature is derived from the published thermal Safe operating area data on the entire PTH12040 in the product specification .The SOA data is determined by Ta ambient operating temperatures versus output current for selected output voltage
If there are any additional questions onPTH12040W, my direct contact information is email@example.com
Maximum Ambient temperature natural CONVECTION versus output current
Example 12Vin and 3.3Vout :absolute Maximum Ambient operating temperature at natural CONVECTION air-flow enclosed case at 0 amps to 25 AMPS IS limited to 85°°C
SOA for 12Vin and 3.3Vout
We are providing heat sink through conduction based cooling. for that case the power is fully dissipated to the heat sink and predicting the case temperature as 95°C.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.