This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Controlling enable of LMZ31710RVQR

Dear Team, 

I want to control INH of LMZ31710RVQR, In datasheet they mentioned to use MOSFET ,

I want LMZ31710RVQR to be OFF state intially and i want to enable this IC using active high signal.

Why cant i use 1K pull down on this INH also connecting this to control IC, Why really the MOSFET required .

Please share me the part number of MOSFET if it must be used.

Regards,

Prasanna G