Hi Team –
I’m trying to track down the exact compensation components used in the LMR14050 – the block diagram in the datasheet only shows a bare block.
Thank you!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team –
I’m trying to track down the exact compensation components used in the LMR14050 – the block diagram in the datasheet only shows a bare block.
Thank you!
Sorry for missing the power stage transconductance, Gcs=iL/Vcomp=5.1.The error amplifier open loop gain GEA=30uA/V. as the EA BW is much higher than the DCDC crossover frequency, so this parameter should have little impact on the loop analysis, so just ingore it.