This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS386000: "overshoot" & "undershoot"

Part Number: TPS386000
Other Parts Discussed in Thread: TCA6416,

Hi,

Please tell me about the allowable values of input signal "overshoot" & "undershoot" for the following devices.

・TPS386000RGP*
・TCA6416APWR

Basically I understand that it meets absolute maximum ratings and ESD immunity.
But please tell us the actual "actual value" (allowable value) on use.

best regards

  • Hello,

    I am not sure I understand your question. For all devices, the input signal must be within the ABS MAX rating found in the ABS MAX table. This accounts for undershoot and overshoot. For TPS386000, the input signal should be no higher than 7V and no lower than -0.3V. For TCA6416, the input voltage should never go higher than 6.5V and lower than -0.5V.

    Does this answer your question?

    -Michael