TI E2E Community
Voltage Monitor with Dual Over/Under voltage Detection equivalent
Is there a TI equivalent to Maxim's ICL7665 Voltage Monitor with Dual Over/Under voltage detection? If not dual then a single would also work fine for my application. The main parameters are over/under protection and a DIP or SOT23(?) package. I want to monitor a Ni-MH battery pack with four AA 1.2 volt batteries. Thanks.
We have an OVP/UVP part similar to the one you point out releasing at the very end of March (SOT23) - but that is the most I can tell you. You may be able to find out more through a local sales rep.
Here is the TI link to preview the TPS3700.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.