Welcome to the Sequencers Section of the TI E2E Support Community. Ask questions, share knowledge, explore ideas, and help solve problems with fellow engineers. To post a question, click on the forum tab then "New Post".
Q: TPS3836K33 "CT" pin (pin 1) by 9312
The part is TPS3836K33 in the DBV package. The question is about the "CT" pin (pin 1). I have a customer who in referencing to the application circuit on page 1 of the data sheet and wants to know what would happen if the pin is not connected to GND or VDD?
I've researched and identified information that states the CT pin is used to charge a capacitor to set the length of the reset signal. Also that it has sensitive current sources and comparators are connected. How will this play out if CT pin is not connected to GND or VDD and more importantly what would be the delay time?
A: Re: TPS3836K33 "CT" pin (pin 1) by 1090425
I'm not sure where you found that the Ct pin can charge a capacitor. On some other ICs it can, but on this IC it is a digital input that sets a fixed delay time. It must be tied high or low.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.