This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TPS22915
I have a circuit that is designed to isolate the V_IN_NET from any voltage on V_OUT_NET. Vout may be any voltage between 0 to 5V.
Vin has two states;
When Vin transitions from unpowered to powered the operation that occurs is:
Thanks for reaching out! To answer your questions:
Is there a path where in the case of IC2 VIN can be powered through the ON pin via a body bias diode, ESD diode?
Is using the body diode between VOUT and VIN of IC2 a valid use case?
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Aleksandras_Kaknevicius:
In reply to William Widjaja:
Please find my responses below:
Some suggestions for your circuit:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.