Hello ,
I am using the TPS2490 IC the control power of 24V, and I would like to know if I can connect the PG pin to pullup that connected to 3.3V (so I can connect it to the FPGA on my board ?
Thanks,
Shai
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello ,
I am using the TPS2490 IC the control power of 24V, and I would like to know if I can connect the PG pin to pullup that connected to 3.3V (so I can connect it to the FPGA on my board ?
Thanks,
Shai